Installing usb driver (for windows 98se only) – JVC XA-MP51S User Manual
Page 7
6
GETTING STARTED
INSTALLING USB DRIVER
(FOR WINDOWS 98SE ONLY)
Follow these instructions to load software that enables a computer to
recognize the Digital Audio Player.
1.
Insert the CD-ROM into the CD-ROM drive of your PC.
2.
Turn off the Digital Audio Player and connect it to your PC with the
USB connector.
3.
Follow the on-screen instructions to install the driver from the CD-
ROM.
On a screen to search for the location of the Digital Audio Player‘s
driver, click the [Browse] button and select the XA-MP51-101 folder
from the CD-ROM drive (If drive is "D", the folder path will be
"D:\_XA-MP51-101") and then proceed to the next screen:
4.
Be sure that the installation completion screen appears.
5.
Reboot the PC.
Make sure that no programs, such as games or anti-virus software, are
running on the PC. If programs are open, close and exit from the
programs before proceeding.
XA-MP101B(E).book Page 6 Thursday, July 14, 2005 5:11 PM