John Deere AC-6975TB-A - Manual (Page 7)

Toolbox Installation Instructions 7
Installation
INSTALLATION INSTRUCTIONS:
CAUTION: THIS INSTALLATION REQUIRES
THE USE OF POWER TOOLS. SAFETY
GLASSES SHOULD BE WORN AT ALL
TIMES DURING THE USE OF THE POWER
TOOLS.
CAUTION: IF YOU ARE UNABLE TO LIFT A
MINIMUM OF 75 LBS., THEN THIS
INSTALLATION WILL REQUIRE THE
USE OF TWO PEOPLE.
CAUTION: PINCH AREA BETWEEN BODY AND
LID OF TOOLBOX. (FIG. 1)
1. Peel backing off the foam gasket (H). (Fig. 2)
2. Attach the foam gasket (H) onto the bottom of the
toolbox (A). Trim the foam gasket (H) flush with
the ends of the toolbox (A). (Fig. 3)
3. Carefully place the toolbox (A) into the back of the
pickup bed. (Fig. 4)
(Fig. 2)
H
(Fig. 3)
(Fig.1)
(Fig. 4)