Basic operations, Now you can play a variety of video cds, Preparation for playing – JVC XL-FV323TN User Manual
Page 9: Loading discs in the disc tray, Starting to play disc(s), Display window
Page 6
XL-FV323TN
LVT0126-001A
Preparation for playing
Turn on the television set, amplifier or receiver to which the Player
is connected. Then select the proper channel and mode to
operate the Player.
CAUTION
Set the sound volume of the television set, amplifier or receiver to
which the Player is connected to a reasonable level before starting
playback.
Press the
/
button on the front panel or the VCD
/
(TV
/
)
button on remote control. The STANDBY indicator goes out.
The display window shows the initial information as shown below.
Loading discs in the disc tray
Use the
0
0
0
0
0
OPEN/CLOSE (or
0
0
0
0
0
on the remote control) button to
open and close the disc tray.
Starting to play disc(s)
Press the
3
3
3
3
3
SELECT (PLAY) button. The Player starts to play from
the disc indicated in the display window.
For individual track selection, use the number keys or the
4
4
4
4
4
/
¢
¢
¢
¢
¢
PREV/NEXT buttons.
When you start play, the Display window shows the disc number and
the track number being played.
If the PBC function is activated, the display window shows “Pb”.
When you press
3
SELECT button during play, the disc will restart
from the beginning of the track except when the PBC function is
activated.
BASIC OPERATIONS
Now you can play a
variety of video CDs!!
Display window
The display window indicates many aspects of control and operation
status.
Shows the disc number being played.
Shows mainly the total number of tracks and the track number being
played.
Shows mainly the cumulative time (minutes and seconds) of the
track. Afterward, total time of the disc is displayed.
The combination of VCD, PBC, and CD-G indicators shows the
type of disc being played.
Each indicator in this area lights when the corresponding function
is activated.
4
1
5
2
3
1
2
3
4
5
1. Open the disc tray by pressing the
0
0
0
0
0
(OPEN/CLOSE) button.
2. Place discs on the disc tray according to the groove with their
label side up.
• To turn the disc tray press DISC SKIP button.
3. Close the disc tray by pressing the
0
0
0
0
0
(OPEN/CLOSE) button.
CAUTION
When loading discs in the disc tray, be sure to put the discs
according to the groove. Otherwise, the discs will be damaged
when the disc tray is closed, and cannot be removed from the unit.
STANDBY/ON
/
VCD
TV
/
/
or
(Remote control)
(Remote control)
or
OPEN/CLOSE
or
(Remote control)
SELECT
SELECT