JVC HR-DD848E - Manual (Page 21)

EN
21
TV signals being received by the recorder’s built-in tuner can be
recorded onto a video tape. You can “capture” a TV programme
using your video recorder.
RECORDING
Basic
Recording
1 2
4 5
3
6
8
0
7 9
2
4
1
3
q
SLOW SLO W
PAUSE
NUMBER
PLAY
Turn on the TV and select the VIDEO channel (or AV mode).
LOAD A CASSETTE
1
Insert a cassette with the record safety tab intact.
● The counter is reset to 0:00:00 and the recorder
power comes on automatically.
CHOOSE A PROGRAMME
2
Press TV PROG +/– or the NUMBER keys to select the
channel you wish to record.
● The TV PROG dial can also be used to select a channel.
SET TAPE SPEED
3
Press SP/LP ( ). Check the SP/LP indicator on the
recorder display panel to confirm the selected tape
speed.
START RECORDING
4
Press and hold RECORD and PLAY on the remote
control, or press RECORD on the recorder.
PAUSE/RESUME
RECORDING
5
Press PAUSE. Press PLAY to resume recording.
STOP RECORDING
6
Press STOP on the remote control or STOP/EJECT on
the recorder. Then press STOP/EJECT to remove the
cassette.
B.E.S.T. takes place at the beginning of both the
first SP and the first LP recording after inserting the
cassette (
੬
pg. 22).
● To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
Record safety tab
Accidental erasure prevention
SP/LP
RECORD
PAUSE
RECORD
STOP/EJECT
PLAY
STOP
TV PROG
TV PROG
TV PROG