Jaguar S-Type - Manual (Page 24)

3-2 Basic functions
JJM 18 05 16/00 Last amend: November 1999 – NAS
Getting started (continued)
Map display (not under guidance)
The initial map screen showing the
current vehicle position is displayed.
Panel controls
F1 (Menu) – Displays the main
navigation menu, see Main menu on
page 3-5.
F3 (Heading) – Changes the map
heading between north to the top of the
screen and vehicle heading to the top of
the screen.
F4 (More) – Selects the additional
button functions, see Additional
functions (not under guidance).
Enter – Stores the map cursor location
as a memory point. The screen shows
‘Press ENTER to store in memory’. When
Enter is pressed, the screen shows ‘Point
stored’.
Zoom level – The scale of the map is
enlarged or reduced.
Cursor – Use the Cursor control to scroll
the map as required. The screen shows
new button functions (F1 to F4), see
Setting of points on page 3-3. Additional functions (not under
guidance)
The additional button functions, selected
by pressing F4 (More), are as follows:
F1 (Home) – If a home position has
been entered, a route to that location
will be calculated, see Route
calculation on page 6-1.
Note: To store your chosen home
position, select the Set Points menu
followed by the Home position and
Store. See Home position
functions (Store) on page 5-10.
F2 (Return) – Calculates a route from
the current position of the vehicle, to the
starting point of the last route to be
calculated, see Route calculation on
page 6-1.
F4 (Q-POI) – Selects the Quick Points of
Interest screen, see Quick points of
interest (Q-POI) on page 3-4.
JOL.307