JVC 0805TNH-II-IM - Manual (Page 26)

26
Initial Setup
Auto Tuner Setup
If you have already run the Auto Tuner as part of the quick setup earlier in this guide, please
skip ahead to “Channel Summary” to continue setting up your television.
Press the M ENU button
π† To AUTO TUNER SETUP
è To operate
è To choose CABLE or AIR
Press the O K button to start
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the
message PROGRAMMING OVER! appears onscreen.
Channel Summary
Channel summary allows you to customize the line-up of channels received by your TV. You
can add or delete channels from the line-up as you like or prevent any unauthorized viewers
from watching any or all 181 channels.
Press the M ENU button
π† To CHANNEL SUMMARY
è To operate
The Channel summary screen will now be displayed with
the channels set to scan marked with an “√”. You can
delete channels from the scan by removing the “√”. If any
channels were missed during auto tuner setup and you
wish to add them, you may by placing an “√” next to the
channel number.
π † √® To the SCAN column
Press the O K button to include or delete from scan
Press the M ENU button when finished
Press the Menu button when finished
AUTO TUNER SETUP
CABLE
PRESS TO START
SELECT OPERATE EXIT MENU
TUNER MODE
OK
CHANNEL SUMMARY
06
07
08
09
10
CHNO.
SELECT OPERATE EXIT MENU
01
02
03
04
05
OK
SCAN CHNO. SCAN
You can block access to a channel by activating the channel lock.
Press the M ENU button
π† To CHANNEL SUMMARY
è To operate
π † √® To the Lock Column ( )
Press the Z ERO button to lock or unlock that channel
Press the M ENU button when finished
LCT1899-001B-A ENG 26 8/5/05, 11:41:47 AM