JVC CD Receiver KD-SH99R - Manual (Page 30)

30
ENGLISH
OTHER MAIN FUNCTIONS
2
2 1
1
Setting the clock
1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 31.)
2
Set the hour.
1 Select “CLOCK HOUR” if not shown on
the display.
2 Adjust the hour.
3
Set the minute.
1 Select “CLOCK MIN.”
2 Adjust the minute.
4
Select the clock system.
1 Select “24H/12H.”
2 Select either “12HOUR” or “24HOUR.”
5
Press SEL (select) to finish the setting.
To check the current clock time while the unit
is turned off, press D (display).
The power turns on, the clock time is shown for
5 seconds, then the power turns off.
Changing the general settings
(PSM)
You can change the items listed on the next page
by using the PSM (Preferred Setting Mode)
control.
Basic Procedure
1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See page 31.)
2
Select a PSM item you want to adjust.
(See page 31.)
3
Adjust the PSM item selected.
4
Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5
Press SEL (select) to finish the setting.
2 1
EN30-36.KD-SH99R[E]f 4/16/01, 9:21 AM 30