GE RM84930 - Manual (Page 9)

9
SETUP
TV
SETUP
1 2 3
4 5 6
7 8 9
Using Your Remote
Code Identification
The Code Identification Feature allows you to
identify the three digit library code stored under
your device button. For example, if you want to find
out what three digit code is stored under your TV
device button, follow the six steps below:
1. Press and hold the
SETUP
button until
the red indicator stays on. Release the
SETUP
button.
. Press and release the desired
device button (TV, VCR , etc.). The
red indicator blinks, then stays lit.
3. Press and release the
SETUP
button.
The red indicator blinks once and
remains lit.
4. To find the first digit
for the code stored
under the device
button pressed in step
, press each numeric
button from 0-9 in
turn. The number that
causes the indicator
light to blink is the first
digit in your code.
5. To find the second digit, repeat step 4.
6. Repeat step 4 again to find the third digit. This
time the red indicator turns off and stays off.