JVC VR-716E - Manual (Page 84)

84
Record Program Using the Program Timer (Start recording on a specific time of the week)
Ⅵ Recording Mode
• [CAMERA] 1 - 4
[REC SPEED] : 12.5
[REC QUALITY] : [H]
[AUDIO REC]
: [ON]
• [CAMERA] 5 - 8
[REC SPEED] : 25
[REC QUALITY] : [N]
[AUDIO REC]
: [ON]
• [CAMERA] 9 - 12
[REC SPEED] : 2.5
[REC QUALITY] : [N]
[AUDIO REC]
: [OFF]
• [CAMERA] 13 - 16
[REC SPEED] : 1/2
[REC QUALITY] : [B]
[AUDIO REC]
: [OFF]
Notes
• A maximum of 8 record programs can be
set using the Weekly Timer.
• Only numbers that have not been pro-
grammed are displayed in the [PRO-
GRAM] field.
• When [1/12 IPS] (1 image per 12 seconds)
or [1/6 IPS] (1 image per 6 seconds) is se-
lected for [REC SPEED], audio recording
is set automatically to “OFF” and this can-
not be altered.
• Click [SAVE] to save settings at VR-716.
• Click [RESET] when settings are incor-
rectly entered.
• Upon clicking [SAVE], restoration of the
original preset value will not be possible.
• When all the “CAMERA” settings of a par-
ticular “BLOCK” in VR-716’s “REC MODE”
Menu are set to “OFF”, the “FRAME
RATE”, “REC QUALITY” and “AUDIO REC”
settings for that block cannot be altered.
• Refer to the notes related to Summer Time.
( ☞ Page 116)
Caution
1.
Click z z
2.
Set to the Program Timer Standby mode
☞ Page 88 ‘Setting VR-716 to the Program Timer Standby Mode’
Check program setting
at the display area of
the Program List for
Weekly Timer.
<Example> Execute recording from 8:00 a.m. every Friday ~ 5:00 p.m. every Saturday.
Connecting to a PC – Routine Uses of the Web Browser – (continued)
Select the Program No..
Select the day/time for
recording to start and
end.
Select the [REC
SPEED], [REC
QUALITY] and [AUDIO
REC] for each camera
channel.
Select [WEEKLY].
Click [SAVE].
1
2
3
4
5
6