Jonsered BB2250 - Manual (Page 8)

English
8
MAINTENANCE
1. In order to maintain your product in proper working order,
perform the maintenance and checking operations described
in the manual at regular intervals.
2. Always be sure to turn off the engine and disconnect the
spark plug before performing any maintenance or checking
procedures.
WARNING
The metallic parts, engine cover, and area around the
engine reach high temperatures immediately after stopping
the engine.
3. Examine the blower at intervals for loose fasteners and
rusted or damaged parts. Use special care around the fuel
line, the muffler, and the ignition wiring.
4. All engine service except for those described in this manual
should be performed by competent service personnel.
Improper service to the blower fan and muffler could cause a
hazardous failure.
5. When replacing the any other part or any lubricant, always be
sure to use only Jonsered products or products which have
been certified by Jonsered for use with the Jonsered product.
6. In the event that any part must be replaced or any
maintenance or repair work not described in this manual
must be performed, please contact the nearest Jonsered
servicing dealer for assistance.
7. Do not use any accessory or attachment other than those
bearing the Jonsered mark and recommended for the unit.
8. Under no circumstances should you ever take apart the
product or alter it in any way. Doing so might result in the
product becoming damaged during operation or the product
becoming unable to operate properly.
TRANSPORTATION
• Drain the fuel from the fuel tank before transporting or storing
the blower.
• Secure the blower so that it does nor receive damage from
shock doing transportation.
• Do not apply strong forces to the blower, such as throwing it or
dropping it. Doing so in validates the warranty.
STORAGE
• When storing the blower, choose a space indoors, dry, cool
and dark, well-ventilated, free from dust and out of the reach
of children.
Safety Precautions
BB2250_English.fm Page 8 Thursday, December 10, 2009 1:35 PM