Jura Capresso IMPRESSA S70 User Manual

Page 13

Advertising
background image

13

After 10 minutes the steam heating-system switches off
automatically. The warning lamps go out. By pressing the
steam key anew, you return to stand-by-status for drawing
off steam.
ECONOMY MODE OFF means that the stand-by-status for
steam is set to 10 minutes and the heating for the cup warm-
ing tray is on. After 10 minutes the heating-system switches
down to a stand-by temperature. By pressing the steam key
anew, the machine returns to stand-by-status for drawing off
steam.

12.7 Programming TIMER CLOCK

A programming of the timer clock is necessary if an automa-
tic switch on time is required.

TIME –.–

Ⅲ Press key .
Ⅲ By briefly pressing key

or

you can set the hours and then

confirm by pressing key

.

Ⅲ By briefly pressing key

or

you can set the minutes and

then confirm by pressing key

.

Ⅲ You can call up the next setting by pressing key .

12.8 Programming automatic switch on time

A programming of the timer clock is necessary if an auto-
matic switch on is needed.

UNIT ON –.–

Ⅲ Press key .
Ⅲ By briefly pressing key

or

you can set the hours and then

confirm by pressing key

.

Ⅲ By briefly pressing key

or

you can set the minutes and

then confirm by pressing key

.

Ⅲ You can call up the next setting by pressing key .

+

P

-

+

P

-

+

P

+

P

-

+

P

-

+

P

12.4 Programming FILTER

Please read chapter 7.1 “Placing filter”.

12.5 Programming WATER HARDNESS

(only with setting FILTER NO)

HARDNESS LEVEL 3

Ⅲ Press key
Ⅲ By pressing key

or

briefly you can programme the water

hardness level.

Ⅲ Then press key

briefly to store the water hardness level in

memory.

Ⅲ You can call up the next setting by pressing key .

To determine the water hardness level please read chapter 6.
“Adjusting for water hardness”.

12.6 Programming ECONOMY MODE

ECONOMY MODE OFF

Ⅲ Press key

ECONOMY (MODE OFF flashes)

Ⅲ By briefly pressing key

or

you can programme the mode

you would like.

Ⅲ Then press key

briefly to store mode in memory

Ⅲ You can call up the next setting by pressing key .

You can programme your machine to “economy mode”. In
the setting ECONOMY MODE ON the steam heating-
system is switched off. The heating for the cup warming tray
is switched off too. If you want to draw off steam you need
to press the steam key

, warning lamps flash and your

machine heats up.

+

P

-

+

P

+

P

-

+

P

E

Advertising
This manual is related to the following products: