GE 22730 GE Smart Digital Converter Box - Manual (Page 20)

0
Trouble
Shooting Picture breaks up and freezes frequently.
- This indicates poor antenna reception.
- Use the signal indicator feature to determine
optimum position of receiving antenna.
- A better antenna may be required.
- Some channels may not have sufficient
signal in your area.
Message box : No signal
- Signal is not strong enough to view.
- Adjust the antenna
Poor sound quality or no sound
- Make sure TV volume is turned up to a
reasonable level.
- Make sure volume on converter box is at
medium level.
- Adjust the levels of TV volume and Digital
Converter Box volume to find optimum
combination of volumes to eliminate any noise.
- If using composite outputs, verify connections of
left and right composite inputs are hooked
up correctly.
- Make sure mute button is not enabled on TV or
Digital Converter Box.
Remote control does not work
- Install new batteries in the remote.
- Ensure batteries are aligned correctly, refer
to instructions (pg 8).
The Digital Converter Box box does not go to
the channel entered on the remote.
- With digital broadcasting each channel can
now have sub-channels. This requires the use
of the
“DASH” button when selecting a channel.
For example, to watch channel 5, enter 5-1
on the remote.
Digital Converter Box box will not turn on
- Push the power button and wait 5 seconds.
Trouble
Shooting