For kd-sh55r – JVC CD Receiver KD-SH77R User Manual

Page 31

Advertising
background image

ENGLISH

31

When connecting a DVD player:

: Turns on and off the power.

3

:

Starts playback.

¡

:

• Fast-forward the track when pressed and

held.

• Skip to the beginning of the next tracks

when pressed briefly.

1

:

• Reverses the track when pressed and

held.

• Go back to the beginning of the current

track when pressed briefly.
Go back to the beginning of the previous
tracks when pressed consecutively.

7

:

Stops operations.

Note:

When you press the above buttons, the display shows
“DVD” and its operation mode (such as

3, 7 ).

When connecting a VCR:

:

Turns on and off the power.

3

:

Starts playback.

¡

:

Fast-winds a tape when pressed and held.

1

:

Rewinds a tape when pressed and held.

7

:

Stops operations.

Note:

When you press the above buttons, the display shows
“VCR” and its operation mode (such as

3, 7 ).

For KD-SH55R:

You can connect two external components to this
unit.
Connect one to the auxiliary input jack on the
control panel, and the other to the CD changer
jack on the rear.

Before operating the external component
connected to the CD changer jack,
select
the external input correctly. (See “To select
the external component to use – EXT INPUT”
on page 26.)

If the input level of the external component
connected to the auxiliary input jack is not
high enough
, increase the input level
properly.
Without adjusting the input level, you may be
surprised at a loud sound when you change
the source from the external component to
another. (See “To adjust the auxiliary input
level – AUX ADJ” on page 26.)

1

Select the external component (AUX
INPUT or LINE INPUT).

When you select a
source, the power
automatically comes on.
Each time you press the
button, the source
changes as described on
page 7.

AUX INPUT: To select the component

connected to the auxiliary
input jack on the control
panel

LINE INPUT: To select the component

connected to the CD changer
jack

• If “LINE INPUT” cannot be selected, see

page 26 and select the external input (“LINE
INPUT”). This cannot be used together with
the CD changer.

2

Turn on the connected component
and start playing the source.

EN30-31.KD-SH77R/55R[E]

2/9/01, 3:57 PM

31

Advertising
This manual is related to the following products: