En g li sh, What the lights mean, Battery saving mode – Jabra BT2040 User Manual
Page 9: Troubleshooting & faq
7
EN
g
Li
Sh
JaBra BT2040 BlueTooTh headseT
WhAT ThE LighTS MEAN
What you see
What this means about your
headset
solid blue light
in pairing mode
Slow single flash*
Connected to phone and in standby
mode
Slow double flash*
not connected to phone and in
standby mode
Quick single flash
Active on call
Quick double flash
Incoming/Outgoing call in headset
Triple flash
Battery low
* Light turns off after 1 minute to save battery.
bATTERy SAviNg ModE
The headset goes into sleep mode after ten minutes if the mobile
phone is not within range. Simply press the answer/end button to
reactivate the headset.
TRoUbLEShooTiNg & FAQ
I hear crackling noises
• For the best audio quality, always wear your headset on the
same side of the body as your mobile phone.
I cannot hear anything in my headset
• Increase the volume on the phone.
• Ensure that the headset is paired with the phone.
• Make sure that the phone is connected to the headset – if it
does not connect either from the phone’s Bluetooth menu or
by tapping the answer/end button, follow the pairing proce-
dure.