English, Connecting audio/video components – JVC RX-7001PGD User Manual

Page 8

Advertising
background image

5

English

About the speaker impedance

The required speaker impedance of the front speakers does differ
depending on whether both the FRONT SPEAKERS 1 and FRONT
SPEAKERS 2 terminals are used or only one of them is used.

CASE 1

When you connect only one set of front speakers

Front

speaker

1

Front

speaker

1

Use front speakers with 8

– 16

impedance.

CASE 2

When you connect two sets of front speakers

Front

speaker

1

Front

speaker

2

Use front speakers 16

– 32

impedance.

Connecting the subwoofer speaker

You can enhance the bass by connecting a subwoofer.
Connect the input jack of a powered subwoofer to the
SUBWOOFER OUT jack on the rear panel, using a cable with RCA
pin plugs (not supplied).

SUBWOOFER

OUT

Powered subwoofer

Connecting Audio/Video Components

You can connect the following audio/video components to this
receiver. Refer also to the manuals supplied with your components.

Audio Components

Video Components

• Turntable

• DVD player*

• CD player*

• TV*

• Cassette deck

• DBS tuner*

or MD recorder*

• VCR

*

You can connect these components using the methods described in
“Analog connections” (below) or in “Digital connections” (see page
8).

Analog connections

Audio component connections

Use the cables with RCA pin plugs (not supplied).
Connect the white plug to the audio left jack, and the red plug to the
audio right jack.

CAUTION:

If you connect a sound-enhancing device such as a graphic equalizer
between the source components and this receiver, the sound output
through this receiver may be distorted.

Turntable

To audio output

Turntable

Note:

Any turntables incorporating a small-output cartridge such as an MC
(moving-coil) type must be connected to this receiver through a
commercial head amplifier or step-up transformer. Direct connection
may result in insufficient volume.

Front

speaker

2

Front

speaker

1

Connecting the rear and center speakers

Connect rear speakers to the REAR SPEAKERS terminals and a
center speaker to the CENTER SPEAKER terminals.

Left rear

speaker

Right rear

speaker

Center
speaker

+

+

CENTER

SPEAKER

REAR

SPEAKERS

RIGHT

LEFT

1

2

RIGHT

LEFT

TAPE

/MD

IN

(PLAY)

OUT

(REC)

CD

PHONO

AUDIO

If an earth cable is provided for your
turntable, connect the cable to the
screw marked (

H

) on the rear panel.

EN01-09.RX-7001PGD[U,US]/f

00.5.31, 10:53 AM

5

Advertising