Jasco 19208 User Manual
Page 2
Single Push Button Kit: If you purchased a kit with a single push button, the
chime tune will be set to Ding Dong from the factory.
Dual Push Button Kit: If you purchased a kit with two push buttons, one push
button will be set to Ding Dong and the other push button will be set to
Westminster from the factory.
The following instructions explain how to change the tune on any wireless push
button.
1. Remove the battery from the push button transmitter.
2. Locate the 9 position jumper shown below.
9 position jumper (This pushbutton is set for Ding Dong Chime since 7=off, 8=on,
and 9=off.)
3. Select the desired chime sound from the table below.
Chime Sound Table
Position
7
8
9
Westminster
ON
OFF
OFF
Ding
Dong
OFF
ON
OFF
Knock
OFF
OFF
ON
Bronze Chime ON
ON
OFF
Cuckoo Clock ON
OFF
ON
Foghorn
OFF
ON
ON
Gong
ON
ON
ON
ON: Add a jumper to a location
OFF: Remove jumper from a location.
4. Remove or add the jumpers to match the table.
5. Store unused jumpers as shown in the picture.