Jensen KT2012 - Manual (Page 10)

COPYING CALLER ID INFO TO A MEMORY PRESET
Press the [ ▼] or [▲] button to locate a
caller ID call to be copied into a
memory preset.
Press the STORE button twice:
“MEM” will be displayed on the display.
Press the Key buttons (0-9) to enter the
desired memory location Repeat these
steps for additional presets.
CALLING BACK A NUMBER FROM THE CALLER ID MEMORY (ON-HOOK)
With the handset on the base, press the
[
▼] or [▲] button to locate a caller ID
call to be dialed.
Press the CALL BACK button twice to
redial; the display will show “PICK UP
CALL”. Pick up the handset and the
number will be automatically dialed.
If the caller’s phone number is 10 digits,
press the CALL BACK button once,
followed by the [
▼] or [▲] button to add
the long distance dialing digit “1”. Press
the CALL BACK button again and pick
up the handset to dial.
17
BASIC OPERATIONS (CONTINUED) BASIC OPERATIONS (CONTINUED)
CALLING BACK A NUMBER FROM THE CALLER ID MEMORY (OFF-HOOK)
Pick up the handset and press the [ ▼]
or [ ▲] button to locate a caller ID call to
be dialed.
Press the CALL BACK button twice and
the number will be automatically dialed.
If the caller’s phone number is 10 digits,
press the CALL BACK button once,
followed by the [
▼] or [▲] button to add
the long distance dialing digit “1”. Press
the CALL BACK button again to dial.
18