JVC KD-S891R - Manual (Page 2)

2
ENGLISH
How to reset your unit
While holding SEL (select), press
(standby/on/attenuator) for more than 2 seconds.
This will reset the built-in microcomputer.
Notes:
• Your preset adjustments—such as preset channels or
sound adjustments—will also be erased.
• If a disc is in the unit, it will eject when you reset the
unit. Be careful not to drop the disc.
How to use the M (MODE) button
If you press M (MODE), the unit goes into functions mode, then number buttons and 5/∞ buttons
work as different function buttons.
Ex.: When number button 2 works as MO (monaural) button.
To use these buttons for original functions again after pressing M (MODE), wait for 5 seconds
without pressing any of these buttons until the functions mode is cleared.
• Pressing M (MODE) again also clears the functions mode.
Time countdown indicator
Position And Reproduction Of Labels
Bottom panel of the main unit
IMPORTANT FOR LASER PRODUCTS
Precautions:
1.CLASS 1 LASER PRODUCT
2.CAUTION: Invisible laser radiation when open and
interlock failed or defeated. Avoid direct exposure to
beam.
3.CAUTION: Do not open the top cover. There are no
user-serviceable parts inside. Leave all servicing to
qualified service personnel.
4.CAUTION: This CD player uses invisible laser radiation
and is equipped with safety switches to prevent radiation
emission when unloading CDs. It is dangerous to defeat
the safety switches.
5.CAUTION: Use of controls, adjustments or performance
of procedures other than those specified herein may
result in hazardous radiation exposure.
CAUTION: Invisible laser
radiation when open and
interlock failed or defeated.
AVOID DIRECT EXPOSURE
TO BEAM. (e) ADVARSEL: Usynlig laser -
stråling ved åbning, når
sikkerhedsafbrydere er ude
af funktion. Undgåudsæt-
telse for stråling. (d) VARNING: Osynlig laser-
strålning när denna del är
öppnad och spärren är
urkopplad. Betrakta
ej
strålen. (s)
VARO: Avattaessa ja
suojalukitus ohitettaessa
olet alttiina näkymättö-
mälle lasersäteilylle.
Älä katso säteeseen. (f)
Caution:
This product contains a laser component
of higher laser class than Class 1.
Name/Rating plate
SEL (select)
(standby/on/attenuator)
EN02-04KD-S891R[E_EX]f.p65 4/7/03, 9:39 AM 2