JBL CONTROL NOW AW - Manual (Page 5)

English
5
4. The mounting bracket is designed to trap the fl ange of the JBL Control NOW
speaker by securing the mounting-bracket cap with two screws through
the bottom of the mounting bracket. Rest the JBL Control NOW speaker’s
rear fl ange in the mounting bracket, as shown. This will support the weight
of the speaker. Slide the mounting-bracket cap over the assembly. Secure
the mounting-bracket cap by inserting two #10-32 x 2" (M5 51 mm) screws
(provided) in the bottom of the mounting bracket and tightening.
Mounting-Bracket Cap
Mounting Bracket
#10-32 x 2" (M5 51 mm) Screws (2)
(side view)
(side view)
Mounting Bracket
shown as looking through
the speaker.
Mounting-Bracket Cap
Mounting Bracket
#10-32 x 2"
(M5 51 mm)
Screws (2)
5. To orient the JBL logo into the correct position, pull the JBL logo slightly
outward from the speaker grille and rotate. The JBL logo is held in place by
a spring. Peel the adhesive cover off the mounting-bracket cover and attach
to the top and bottom of the mounting assembly.
Mounting-Bracket
Cover
Mounting-Bracket
Cover
An alternate
vertical orientation
is shown here
Vertical
orientation
Bracket Cover
Bracket Cover
Vertical
orientation
Regardless of whether you choose a vertical or horizontal orientation,
when mounting the JBL Control NOW speaker to a single wall surface, you
should always install the wall-mounting bracket in a vertical orientation.