Jack Lananne's Power Juicer PPJJEE VV22 - Manual (Page 8)

9
CLEANING YOUR
POWER JUICER EXPRESS
• Turn off the power switch and wait until the motor completely stops.
• With dry hands, unplug the power cord from electrical outlet.
• Disassemble the machine. (See disassembly instructions.)
• Clean all other parts in warm, soapy water. A mild detergent is recommended. Rinse well
and dry thoroughly. All components are dishwasher safe with the exception of the base.
Do not use in European Import or a Commercial dishwasher.
• See instructions below for cleaning juice spout.
• Wipe base with a soft damp cloth or sponge. Do not submerge base in water.
Do not spray with water or any other liquid. Base is not dishwasher safe.
• To clean the filter/blade, hold under warm running water. Use a soft-bristled dish washing
brush gently to completely clean pulp from filter. Rinse the filter from the outside under
running water.
• Dry components thoroughly then assemble the machine and turn the power on to spin out
any excess water.
• Make sure unit and parts are completely dry then store in a cool, dry place.
• We recommend removing juice spout after each use.
To Clean Juice Spout:
STEP 1:
Locate removable juice spout locking mechanism on
the bottom side of receptacle.
Note: Juice spout will be in the locked position.
STEP 2:
To unlock, turn locking mechanism counter-clockwise,
lining up notch with juicer spout hinge pivot arm.
IMPORTANT: When reattaching juice spout back into
original position make sure juice spout is in the locked
position and tightly secured before use.
STEP 3:
Lift up juice spout carefully from receptacle
and remove to clean.
To Reattach:
insert juice spout back into original
position and turn the locking mechanism clockwise to
lock into place.
Locking
Mechanism
Hinge
Pivot Arm
LOCKED POSITION
UNLOCKED POSITION