JVC C-13110 - Manual (Page 24)

Return+
The R ETURN + button has two functions:
Return - Returns to the channel viewed just
before the channel currently onscreen.
Return+ - Lets you program a specific channel to
return to while scanning through the channels.
R ETURN + and hold for five seconds
Scan using the Channel+/- buttons
R
ETURN
+
You will return to your programmed
channel.
• To cancel your Return+ channel, press and hold
the R
ETURN
+ button for five seconds. The
message “RETURN CHANNEL CANCELLED!” will
appear.
• Return+ works only with C
HANNEL
+/-. Pressing
any number key will cancel Return+.
• For more information on Return and Return+,
turn to page 12.
VCR Buttons
You can use this remote control to operate the
basic functions of your VCR. These functions
include: play, record, rewind, fast-forward, stop,
pause, channel scan, TV / VCR, power on, and
power off.
• The remote is preset with the code 000 to control
JVC-brand VCR’s. For any other manufacturer’s
brand VCR, please see the code chart and
instructions on page 11.
• RM-C205 Users: The model RM-C205 remote
will only control JVC-brand VCR’s.
Number Buttons - 10 Key Pad
To move directly to a specific channel, enter the
channel number with the number buttons on the
remote. For example, to move to Channel 7:
0 (zero )
7 (seven)
100+ Button
Use the 100+ button to directly access channels
above Channel 99. For example to move to channel
1 2 4 :
1 0 0 +
2 (two)
4 (four)
Muting
The M UTING button instantly turns the volume down
completely when you press it.
M
U T I N G
The volume level will instantly go to zero.
• To restore the volume to its previous level, press
M UTING again.
Input
Selects the input source: TV (cable or antenna
input) or Video (VCR or other video device).
I
N P U T
24 Button Functions
RETURN CHANNEL
PROGRAMMED !