JVC AV 32FA44 - Manual (Page 22)

Remote Programming
22
Cable/Satellite Search Codes Function
1) Slide the first 2-Way Mode Selector switch to CATV.
2) Press the P
OWER
and R
ETURN
+ buttons. Hold for at least three seconds and release.
3) Press the P
OWER
button on the remote, and see if the cable or satellite box responds.
4) If there was a response, press R
ETURN
+. The codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 52 times without a response, use the
remote control that came with your equipment.
5) Press R
ETURN
+ to exit.
VCR/DVD Search Codes Function
1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR” or
“DVD”.
2) Press the VCR or DVD P
OWER
and R
ETURN
+ buttons. Hold for at least three seconds and
release.
3) Press the VCR or DVD P
OWER
button, and see if the VCR or DVD responds.
4) If there was a response, press R
ETURN
+. The codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 80 times for the VCR (30 times for
the DVD player), and there is no response, use the remote control that came with your
equipment.
5) Press R
ETURN
+ to exit.
Search Codes
GJ English 4/24/03, 12:50 PM 22