Jenn-Air 720-0165 - Manual (Page 9)

SIDE SHELF HANDLE ASSEMBLY
Estimated Assembly Time: Approximately 5-7 minutes
Required Tools: Phillips Screwdriver (not included)
1. Remove the four screws from the side of the shelf.
2. Align the holes in the side burner handle with the holes in the shelf.
3. Insert the screws and tighten.
7
BATTERY INSTALLATION
1. Remove the ignition button housing.
2. Insert the battery into the housing with the positive terminal facing outward.
3. Replace the ignition button housing after the battery has been installed.