JVC VIDEO CASSETTE HR-J295EK - Manual (Page 31)

basic features 31
before you start
Make sure that the
VCR’s clock is set
correctly
Insert a cassette with
the safety tab in place
Turn on the TV and
select the Video channel
or the AV Mode
Set SYSTEM to the
appropriate mode.
(
੬ pg. 43)
VIDEO Plus + ®
Timer Programming
The VIDEO Plus+ system uses the code numbers – called PlusCodes –
printed after each programme in your TV listings guide. These are a kind of
shorthand for video recorders and using them automatically sets your VCR
to record the correct programme, channel and time. Up to 7 timer recording
programmes within a month can be made.
Get to the VIDEO Plus + Screen
Press VIDEO Plus+. You will see the following TV screen information.
Press ^& to select ONCE (once), DAILY (Monday–
Friday) or WEEKLY (weekly serials).
Enter the PlusCode Number
Press the number keys on the Remote Control to
enter the PlusCode number of the programme you
wish to record, then press OK. The programme list
appears.
• If you make a mistake, press * to delete the
incorrect number and then enter the correct one.
• If the number you entered is invalid, PLEASE
CHECK appears on the TV screen. Input a valid
PlusCode number, then press OK.
continued to next page
- - - - - - - - - - -
0~9,
ONCE
VIDEO PLUS+
OK i
1234 5
0~9,
DAILY
VIDE PLUS+
REC
HR-J295EK-EN/p31-36 2/27/2, 3:04 PM 31