JVC GET0117-001A - Manual (Page 2)

2
ENGLISH
(Standby/On/Attenuator)
How to reset your unit
Press and hold both the SEL (Select) and
(Standby/On/Attenuator) buttons at the same time for
several seconds.
This will reset the built-in microcomputer.
NOTE:
Your preset adjustments — such as preset channels or sound
adjustments — will also be erased.
If a CD is in the unit, it will eject when you reset the unit.
Pay attention not to drop the CD.
SEL (Select)
How to use the MODE button
If you press MODE, the unit goes into functions mode and the number buttons work as different
function buttons.
To use these buttons as number buttons again after pressing MODE, wait for 5 seconds without
pressing any number button until the functions mode is cleared.
• Pressing MODE again also clears the functions mode.
Time countdown indicator
MODE
MO RPT RND 7 8 9 10 11 12
IMPORTANT FOR LASER PRODUCTS
Precautions:
1.CLASS 1 LASER PRODUCT
2.CAUTION: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure
to beam.
3.CAUTION: Do not open the top cover. There are no user-serviceable parts inside. Leave all servicing
to qualified service personnel.
4.CAUTION: This CD player uses invisible laser radiation and is equipped with safety switches to
prevent radiation emission when unloading CDs. It is dangerous to defeat the safety switches.
5.CAUTION: Use of controls, adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
EN02-03-KD-S595[U]f 10/21/02, 12:58 PM 2