JVC RX-F10S - Manual (Page 14)

10
Getting star
ted
Y P B P R
DVR/DVD
IN
MONITOR
OUT
RIGHT LEFT
Å ı
AUDIO
VIDEO S-VIDEO
SUB-
DVR/DVD
IN
CENTER
VIDEO IN
VIDEO
COMPONENT
ı
З О
Е
Stereo audio cable
(not supplied)
Green
Blue
Red
Component video cable
(not supplied)
S-video cable (not supplied)
Composite video
cable (not supplied)
VCR, etc.
Å To S-video output
ı To composite video output
Ç To component video output
Î To left/right audio channel output
NOTE
Connect Y, P B , and P R correctly.
7 Connecting another video component to the VIDEO IN jacks
If your video components have S-video (Y/C-separation) and/or component video (Y, P B , P R ) terminals, connect them using an S-video
cable (not supplied) and/or component video cable (not supplied). By using these jacks, you can get better picture quality in the order:
Component video > S-video > Composite video
To enjoy the playback from the component connected to these jacks, select “VIDEO” as the source (see page 12).
Turn off all components before making
connections.
7 Connecting a TV to the MONITOR OUT jacks
Stereo audio cable
(not supplied)
Green
Blue
Red
Component video
cable (not supplied)
TV
Å To component video input
ı To left/right audio channel input
IMPORTANT
Audio signals come out through the AUDIO MONITOR OUT (RIGHT/
LEFT) jacks ONLY when TV Direct is in use (see page 14).
NOTE
Connect Y, P B , and P R correctly.
Turn off all components before making
connections.
White Red Yellow
White Red
06-11RX-F10[B]_f.p65 04.2.13, 16:40 10