Jet Tools GH-2280ZX - Manual

jettools.com
The JET ® ZX Series Large Spindle Bore Lathe line-up has been expanded with the
introduction of the GH-2280ZX. This new 10HP ZX Series lathe boasts a 22" swing
over bed and comes standard with a 10" 3-jaw chuck with top reversing jaws and a
12" 4-jaw chuck. The 22" ZX Series Large Spindle Bore Lathe comes equipped with
a 3-1/8" bore spindle supported by two tapered bearings and one ball bearing and a
universal gear box with pitch threads in inches, metric, diametral and module. The
universal gear box is dial controlled eliminating the need for changing end gears. The
GH-2280ZX also comes standard with a follow rest and large capacity steady rest.
22" x 80" ZX Series
10HP Large Spindle Bore Lathe
STOCK NO. 900479
10M 09/06
©2006 WMH TOOL GROUP, Inc. All Rights Reserved.