JVC AV-20N83 - Manual (Page 7)

7
Basic operation
• The illustration below is for the remote control
RM-C1017 supplied with N83 and D83 models.
Your remote control may not look exactly like
the illustrations.
MUTING
OFF
TIMER
ECO
SENSOR
PICTURE
MODE
CHANNEL
SCAN
SYSTEM
COLOUR SOUND
MENU
CHANNEL
RETURN+
POWER
DISPLAY
TV/VIDEO
VOLUME
1 2 3
4 5 6
7 8 9
0 -/--
SURROUND
Ι/ΙΙ
CINEMA
SURROUND
TV
RM-C1017
PICTURE
BOOSTER
1 Press the POWER button to turn
your TV on.
• If your TV does not turn on, press the Main
power button on the TV then press the
POWER button again.
• You can also turn on your TV by pressing
any of the following buttons;
- the CHANNEL m button
- the Number buttons
- the TV/VIDEO button
2 Select a channel.
■ Press the CHANNEL m button.
• Up/down selection cannot be selected for
channels to which the SKIP has been set
to “YES”. See page 16.
■ Press the Number buttons to enter
the channel number.
• If you want to enter a two-digit number,
press the -/-- button to select the two digit
mode “--”, then enter the channel num-
ber.
3 Press the VOLUME M button to
adjust the sound.
4 To turn your TV off, press the
POWER button.
• We recommend that you press the Main
power button on the TV to turn the main
power off if you do not plan to use your TV
for a long time or if you wish to save energy.
If the picture is not clear:
Press the COLOUR SYSTEM button to
select another colour system, see page 8.
Viewing Images from an External
Device:
Press the TV/VIDEO button to select the
VIDEO mode.
• You can also use the INPUT function to select
the VIDEO mode. For details, refer to page 12.
LCT1204-25K83-E 02.9.20, 6:43 PM 7