Jwin 8-Channel Quad Splitter JV-TV5020 - Manual (Page 8)

JV-TV5020 USER’S MANUAL JV-TV5020
USER’S MANUAL
8-CHANNEL QUAD SPLITTER 8-CHANNEL QUAD SPLITTER
④ DC IN is input for DC +12V.
4. INSTALLATION
4-1. Basic System Installation
Perform following steps to install your splitter. See Fig. 3.
Fig 3. INSTALLATION FOR CAMERAS
- Unpack all components of the splitter from the packing
material.
- Identify all of the following pieces:
z Color Quad Splitter
z Adaptor (+12V, 1.5A)
z Remote control
z CCD Cameras and Camera Cables (Optional)
z User’s manual
- Place the quad splitter in a convenient location for your
usage. See ‘Important Safeguards’ in this manual.
- Install cameras to be connected to this splitter.
the DATE (MM:DD:YYYY). Change the content using the
▲ and the ▼ buttons. Press the ENTER button again to
stop flashing the DATE.
- Use the ◀ and the ▶ buttons to shift the cursor to the
next digit.
- Press ENTER button at the EXIT location to exit from this
mode, the splitter will display the quadrant pictures.
c. There are three formats to display the date.
- MM-DD-YYYY: for U.S.A.
- YYYY-MM-DD: for Asian countries.
- DD-MM-YYYY: for European countries.
d. Set the TIME & TITLE Display and BOUNDARY LINE
- Place the cursor to the “Y”.
- Selecting Y or N using the ENTER button will turn the
TIME & TITLE Display and BOUNDARY LINE ON or OFF.
e. Set the BLANK COLOR
- Place the cursor to the “BLUE”.
- Selecting BLUE, GRAY or BLACK using the ENTER
button will decide the color of the blank channel.
f. Set the EXIT
- Place the green color character to the EXIT with the ▲
and the ▼ buttons.
- Press the ENTER button to exit the MENU setup mode.
5-5-2. Page 2 INDIVIDUAL Menu
The following items can be adjusted or programmed on this
MONITOR
VIDEO IN
4 5