11 display (programme time) – John Lewis 1609 User Manual

Page 14

Advertising
background image

14

The time value shown on the display will decrease by
one unit every hour.

You can change the delay time at any moment,
before you press the “Start/Pause” button.

If you have already pressed the “Start/Pause” button,
and you wish to cancel the delay time, proceed as
follows:

• Set the machine to PAUSE by pressing the

“Start/Pause” button;

• Press the “Delay start” button until the symbol “

00’’

is displayed.

• Press the “Start/Pause” button again.

Important!

The “Delay start” cannot be used with

Drain”programme.

Note!

The door will be locked throughout the delay time.

If you need to open the door, you must first set the

washer-dryer to Pause by pressing the “Start/Pause
button. After you have closed the door, press the
Start/Pause” button again.

11 Display (Programme time)

The following pieces of information are shown on the
display:

Duration of washing programme in hours and

minutes, after you have selected a programme (for
example 2.05).

The duration is calculated automatically on the basis

of the maximum recommended load for each type of
fabric.

2.05

While the programme is running, the displayed time

value decreases by one unit every minute.

The washer-dryer has stopped with water in

the tub, if the “Rinse hold” option has been
selected: this is indicated by a flashing zero. The
Door lock light is still on and the door is still locked.

The washer-dryer has completed the

programme: this is indicated by a flashing zero.
The Door lock light has gone off. It is now possible
to open the door.

After starting the programme, the remaining time is
updated every minute.

Stand-by

If your laundry is not removed within 10 minutes
after the programme has finished, the backlight of
the display switches off and the energy saving
system will be enabled. Only the pilot light of the
Start Pause button is blinking to indicate that the
appliance has to be switched off.

By pressing any button the appliance will come out
from the energy saving status and you could set
another washing programme or switch off the
appliance.

0

1.25

132963590.qxd 27/05/2008 10.45 Pagina 14

Advertising