JVC KV-DT2000 - Manual (Page 5)

5
ENGLISH
Controls and features
KV-DT2000 functions together with the
supplied remote controller—RM-RK520.
How to reset your unit
This will reset the microcomputer. Your preset
adjustments will also be erased.
Installing the lithium coin battery
(CR2025)
When operating, aim the remote controller
directly at the remote sensor. Make sure
there is no obstacle in between.
• For connecting the remote sensor, refer to
the Installation/connection manual (separate
volume).
Caution:
Warning:
• Do not install any battery other than
CR2025 or its equivalent; otherwise, it
may explode.
• Store the battery in a place where children
cannot reach to avoid risk of accident.
• To prevent the battery from over-heating,
cracking, or starting a fire:
– Do not recharge, short, disassemble,
heat the battery, or dispose of it in a fire.
– Do not leave the battery with other
metallic materials.
– Do not poke the battery with tweezers or
similar tools.
– Wrap the battery with tape and insulate
when throwing away or saving it.
Main elements and features
1 EPG (Electronic Program Guide) button*
• Shows the TV program list sent by
broadcast site. Press 5/∞/2/3 to scroll
to the desired channel and program.
2 (standby/on) button
• Turns the power on or off.
To be continued....
(On the unit)
(On the external
remote sensor)
or
EN02-13_KV-DT2000[E]f.indd 5 EN02-13_KV-DT2000[E]f.indd 5 9/23/05 11:35:37 AM 9/23/05 11:35:37 AM