Jensen VM9412 - Manual (Page 23)

19
VM9412
close the menu). The preset number and station
appears highlighted.
Recalling a Station
1.
Select a band (if needed).
2. Touch an on-screen preset button (6) to select the
corresponding stored station.
Auto Store (AS)
To select six strong stations and store them in the current
band:
1. Select a band (if needed).
2. Press the AS button (3) on the control panel or touch AS
on the screen for 2 seconds to activate the Auto Store
function.
The new stations replace stations already stored in that band.
Preview Scan (PS)
To scan the AM or FM band for a preview of available stations
in your particular area, touch the PS button (21) on page two
of the on-screen controls. Touch again to stop preview scan.
Local Radio Station Seeking (LOC)
When the Local function is on, only radio stations with a
strong local radio signal are played. To activate the Local
function in AM/FM tuner mode, touch the 1/2 button to access
the second screen of menu options, and then touch the on-
screen LOC button. Touch the LOC button again to turn Local
off. When the Local function is active, the LOC indicator at
the top of the screen is illuminated.
P1 87.5 MHz
P2 90.1 MHz
P3 98.1 MHz
P4 106.1 MHz
P5 107.9 MHz
P6 102.9 MHz