JVC KS-FX433R - Manual (Page 4)

4
ENGLISH
RADIO OPERATIONS
Listening to the radio
1
/I
ATT
Note on One-Touch Operation:
When you select a band in step 2 below, the power automatically comes on. You
do not have to press this button to turn on the power.
Turn on the power.
Select the band (FM1, FM2, FM3 or
AM).
You can select any one of FM1, FM2, and FM3
to listen to an FM station.
2
Note:
When a cassette is in the cassette compartment, you cannot select the tuner. Be
sure to eject the cassette from the cassette compartment to listen to the radio.
3
To stop searching before a station is received, press the same button you have pressed
for searching.
To tune in a particular frequency manually:
1 Select the band (FM or AM).
Press FM or AM.
2 Press and hold or until “M” starts flashing on the display.
Now you can manually change the frequency while “M” is flashing.
3 Press or repeatedly until the frequency you want is reached.
• If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and
9 kHz intervals for AM — MW/LW) until you release the button.
1
2 3
Start searching a station.
When a station is received, searching stops.
To search stations
of lower
frequencies.
SSM
To search stations
of higher
frequencies.
F M A M
FM1
AM
FM2
FM3
EN04-15KS-FX433R[E]/2 98.12.2, 5:08 PM 4