JVC KS-F184 - Manual (Page 10)

10
SOUND ADJUSTMENTS
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
Select the item you want to adjust.
Each time you press the
button, the adjustable
items change as follows:
Indication To do: Range
BAS Adjust the bass. –6 (min.)
(Bass) |
+6 (max.)
TRE Adjust the treble. –6 (min.)
(Treble) |
+6 (max.)
FAD* 1 Adjust the front R6 (Rear only)
(Fader) and rear speaker |
balance. F6 (Front only)
BAL Adjust the left L6 (Left only)
(Balance) and right speaker |
balance. R6 (Right only)
VOL* 2 Adjust the volume. 00 (min.)
(Volume) |
50 (max.)
* 1 If you are using a two-speaker system, set the fader
level to “00.”
* 2 Normally, the + and – buttons work as the volume
control buttons. So you do not have to select “VOL”
to adjust the volume level.
2
Adjust the level.
3
Repeat steps 1 and 2 to adjust the
other items.
Turning on/off the super bass
function
The super bass function allows you to maintain
the richness and fullness of the bass sound
regardless of how low you set the volume.
Each time you press the
button, the function turns on
and off alternately.
To decrease the level
To increase the level
Ex.: When you select “TRE” (treble)
S.BASS indicator
EN10-15_KS-F184[UI]f.p65 1/18/05, 9:07 AM 10