John Mills Titanium Hair Straightener - Manual (Page 6)

6 - Titianium Hair Straighteners
• Let the appliance cool completely before putting
it away.
• If the supply cord or any part of the product is
damaged, it must be replaced by the manufacturer
or its service agent, or similarly qualified person,
in order to avoid hazard.
• To unplug: grasp the plug not the cord. Do not
unplug by pulling on the cord.
• Switch off at the mains socket before unplugging.
• Incorrect reassembly or repair to the appliance
can cause risk of fire, electric shock or injury to
persons when the appliance is used.
• Save these instructions.
Extra Safety Precautions
1. The unit becomes VERY HOT when in use. Take
care to avoid contact between the hot surfaces
of the plates and the skin, particularly around the
face and neck.
2. Do not touch the plates when the appliance is
switched on or just after it has been turned off.
ALLOW AT LEAST 30 MINUTES TO COOL DOWN
BEFORE STORING AWAY.
3. The appliance should NEVER be stored whilst
hot or while still connected to the mains. Always
ensure the appliance is switched off at the mains,
unplugged from the mains and it has cooled