JVC AV 32S776 - Manual (Page 58)

58
Button Functions
When you change the aspect ratios, it is different from their broadcast or recorded program.
Aspect Ratios (Continued)
Press the A SPECT button
• By pressing the A SPECT button, you can change the size.
Notes:
• You can also choose the size by pressing the π† buttons.
• When you change the aspect ratio or signal, reset the picture position to center.
• You can also access the FRONT CONTROL PANEL screen by using the M
ENU button on
the side of the TV instead of the remote control. It appears between INITIAL SETUP and
PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose
ASPECT by pressing M
ENU † on the side panel and choose a mode by using the C HANNEL
+/- buttons ( √ OPERATE ® ). (AV-30W776 ONLY)
• "SLIM" can only be dispalyed when the signal is ATSC (480i or 480p). (AV-30W776 ONLY)
• If the televison receives a 16:9 signal from your HDMI device, the aspect mode will turn to
FULL automatically. If the television receives a 4:3 signal from your HDMI device when you
are in FULL aspect mode, it will return to REGULAR aspect mode. If you change the aspect
mode after the televison changed it to FULL automatically, the televison will change to the
aspect mode you choosed. (AV-30W776 ONLY)
ASPECT
PANORAMA
CINEMA
FULL
REGULAR
ASPECT
PANORAMA ZOOM
CINEMA ZOOM
FULL
HD (1080i, 720p)
ATSC (1080i, 720p) NTSC, 480i, 480p
ASPECT
PANORAMA ZOOM
CINEMA ZOOM
FULL
SLIM
ATSC (480i, 480p)
AV-30W776
HD (1080i, 720p)
ATSC (1080i, 720p) NTSC, 480i, 480p
ASPECT
4:3
16:9
V STRETCH
ASPECT
16:9
HD ZOOM
AV-27S776, AV-32S776, AV-32S766
ATSC (480i, 480p)
ASPECT
4:3
16:9
LCT1855 English 58 7/18/05, 12:03:30 PM