JVC KT-SR3000 - Manual (Page 18)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
18
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Presetting the Desired Channels
You can store 6 your favorite channels into each of 5
bands (A to E)—total 30 channels.
1. While in the Normal Operation mode, press BAND
repeatedly to activate the preset band you want.
The selected band is shown in the lower right
corner of the screen.
2. Select the channel you want to preset (see pages 15
to 17).
3. Press and hold the number key 1 – 6 you want to
store the channel in for about 2 seconds.
The selected preset number flashes and then
remains lit on the display to show that it has been
memorized.
• If the preset button already has a channel stored
in it, it will be replaced with the new channel.
Selecting a preset channel
1. Press and hold BAND while in the Normal
Operation mode.
JVC PnP enters the Preset Tuning mode.
• Each time you press and hold BAND, the Normal
Operation screen and the Preset Tuning mode
screen alternate.
2. Press CH
5 / ∞ (or CH + / –) to move through
your preset channels. The selected band and preset
number is shown in the lower right corner of the
screen.
Tuning in to preset channels directly
You can also tune in to a preset channel by entering
preset numbers.
1. While in the Normal Operation mode or the Preset
Tuning mode, press BAND repeatedly to activate
the preset band you want. The selected band is
shown in the lower right corner of the screen.
2. Press the number keys 1 – 6 to select your desired
preset channel.
Normal Operation mode
P
Preset Tuning mode
P
KT_SR3000_15_25.p65 05.8.22, 2:07 PM 18