Replacement parts and specif, Service literature, Product specifications – John Deere 3800 User Manual

Page 17: Replacement parts and specifications, Service literature product specifications

Advertising
background image

Replacement Parts and Specifications - 13

REPLACEMENT PARTS AND SPECIFICATIONS

Service Literature

If you would like a copy of the Parts Catalog or Technical Manual
for this machine call (888) 228-3068 or contact your local dealer.

Parts

We recommend John Deere quality parts and lubricants, available
at your John Deere dealer.

Part numbers may change - use part numbers listed below when
you order. If a number changes, your dealer will have the latest
number.

When you order parts, your John Deere dealer needs your
machine model and revision number. He may also need your
engine Model and serial number. These are the numbers that you
recorded in Product Identification.

Part Numbers

PumpSaver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6039

Pump Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6033

O-Ring Maintenance Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6048

Water Inlet Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B2384GS

John Deere Turf Gard Engine Oil Bottle . . . . . . . . .Contact Dealer

Fuel Stabilizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5041D

(Part numbers are subject to change without notice. Part
numbers may be different outside the U.S.A.)

Product Specifications

Model 3800

Outlet Pressure . . . . . . . . . . . . . . . . . . . . . . .3800 PSI (262 BAR)

Flow Rate . . . . . . . . . . . . . . . . . . . . . . 4.0 GPM (15.14 liters / min)

Water Supply Temperature . . . . . . . . .Not to exceed 100°F (38°C)

Pump Oil Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9.6 fl. oz.

Shipping Weight . . . . . . . . . . . . . . . . . . . . . . . . . 154 lbs. (70 kg)

This product is rated in accordance with PWMA standard PW101
(www.pwma.org). Actual pressure at the point of discharge may
vary due to factors including: the inclusion or exclusion of a
detergent injection system; variations in engine performance; and
environmental conditions.

Advertising