Jeep 2WD - Manual (Page 5)

JEEP
Kit Breakdown (included in complete kit)
Kit Breakdown (included in complete kit)
Front/Rear Recommended Complete Kit Front Front Coil Rear
Year Application Ride Height (1)Tire Size w/ES Series or MX6 Kit Springs U-bolt Kit
84-01 XJ Cherokee 3.0" / 2.0" 31"x10.50" K3058B (3) 55590B 55592 50050 (2)
4WD/2WD K3058BMX 55590B 55592 50050 (2)
Front/Rear Recommended Complete Kit Front / Rear Front Coil Rear Coil
Year Application Ride Height (1) Tire Size w/ES Series or MX6 Box Kit Springs Springs
92-98 ZJ Grand Cherokee 3.0" / 2.5" 31"x10.50" K3059B (3) 55591B 55598 55593
4WD/2WD K3059BMX 55591B 55598 55593
44
JEEP XJ CHEROKEE MID-SIZE 4WD & 2WD
JEEP ZJ GRAND CHEROKEE 4WD & 2WD
Complete Kit
Complete Kit
Important
Ordering Notes
4WD/2WD
1. All ride height increases are approximate and will vary due to vehicle specification ( engine size, factory suspension options , trail equipment, etc).
2. Cherokees are equipped with different diameter rear axles. Use P/N 50055 rear u-bolts for 2.75" diameter. P/N 50050 for 3.25" diameter. Please
determine axle dimensions before ordering.
3. Vehicles equipped with light duty, double offset joint (rubber boot) front driveshafts must be replaced with spicer constant velocity (CV) type if
driveline vibration occurs. Additional driveline modifications may be required for height increases over 2".
4. Coil spacer P/N 55496 can be used to increase front ride height by 1". Recommended for Cherokee when using P/N 53111 rear springs.
*
Replacement rear spring bushings P/N 90-3801 are sold as a set for one P/N 53111 spring.
WCPG_2006_PROCOMP 3/24/06 7:07 PM Page 44