JVC XL-R5020BK - Manual (Page 45)

43
Message
Message
ALL SKIP TR
ALREADY FINAL
ALREADY UNFIN.
BLANK DISC
CANNOT ERASE
CANNOT FIN.
CANNOT PLAY
CANNOT REC
CANNOT UNFIN.
CDR DISC NG
DAO DISC
DISC FULL
NOT AUDIO IN
NOT REC MUTE
NO AUDIO DISC
NO RW DISC
NO R/RW DISC
OPC ERROR
OPC FULL
PMA FULL
SCMS PROTECT
SHORT REMAIN
SKIP FULL
TNO FULL
TRAY LOCKED
UNLOCK
UPDATE OPC
Signification
Skip marks are recorded to all the tracks.
You are trying to record on a finalized disc.
You are trying to unfinalize an unfinalized disc.
No track is recorded on the loaded disc.
Loaded CD-RW disc is damaged. Erasure on this disc is
impossible.
Loaded disc is damaged. Finalization on this disc is impossible.
On 3-CD Changer, damaged disc is loaded or an MP3 disc is
detected during Program Play and Random Play.
Recording on this disc is impossible due to the disc type—for
example, an MP3 disc, and to incorrect connection.
Loaded CD-RW disc is damaged. Unfinalization on this disc
is impossible.
Loaded CD-R is damaged.
You are trying to unfinalize a CD-RW which has been
recorded using the “Disc At Once” recording system.
You are trying to record on a fully recorded CD-R or CD-RW.
Incoming digital signal from the external component is not of
an audio format.
You are trying to use the REC MUTE button during
Synchronized Recording.
Loaded disc is not an audio disc or an MP3 disc.
You are trying to perform one of the functions for a CD or
CD-R which is only possible on a CD-RW.
You are trying to perform one of the functions for a CD which
is only possible on a CD-R or CD-RW.
OPC cannot be performed. No recording or erasure can be
performed on this disc.
OPC is full. No recording or erasure can be performed on this
disc.
PMA is full. No recording or erasure can be performed on this
disc.
Digital recording is prohibited in accordance with SCMS
regulations.
The remaining time on a disc is shorter than the playing time
of the track you are trying to record.
21 skip marks are already recorded.
99 tracks have been recorded. No further recording is possible.
You are trying to eject a disc while Tray Lock is in use.
The external digital component is not connected properly or
is turned off, or its signals are incompatible.
OPC is being performed before recording, when a disc is just
inserted in CD Recorder.
Solution
Replace the disc.
Replace the disc.
Replace the disc.
Check the disc or connection.
Replace the disc.
Replace the disc.
Replace the disc.
Replace the disc.
Check the source played on the external
component connected to the DIGITAL IN
terminals.
You can only use the REC MUTE button
during Standard Recording.
Replace the disc.
Load a CD-RW.
Load a CD-R or CD-RW.
Replace the disc.
Replace the disc.
Replace the disc.
See “SCMS” on page 42.
To record skip marks, delete skip-
marked tracks first. See page 35.
To record other tracks, delete unwanted
tracks first (CD-RW only).
Unlock Tray Lock (see page 15).
Check the connection, or playback
source.
This is normal. After OPC is correctly
done, recording starts.
37-45.XL-R5020BK_f 02.5.28, 11:34 AM 43