Make corrections, Return to normal screen, Engage timer mode – JVC HR-A53U User Manual

Page 25

Advertising
background image

25

MAKE CORRECTIONS

6

To change any of the settings, press OK or SEARCH
TY

until the item you want to change begins

blinking. Then set as in step 5.

RETURN TO NORMAL

SCREEN

7

Press MENU as many times as necessary.

● Press just once to access the Auto Timer screen

(

੬

pg. 27).

ENGAGE TIMER MODE

8

Press TIMER. The VCR's TIMER indicator lights and the
VCR turns off automatically.

NOTES:

●

To disengage the timer before recording starts, press TIMER
again. Pressing once more re-engages it.

●

In case of a power failure after programming, the VCR’s memory
backup keeps your selections for approximately 3 minutes.

●

If you select "PROGRAM SET" without having set the date and
time, an error message appears. Follow its instructions.

●

If you enter a start time that has already passed, "ERROR"
appears on the screen and blinks.

●

Programs that start after midnight must have the next day’s date.

●

After timer recording is completed, the VCR’s power goes off
automatically.

●

You can program the timer while a regular recording is in
progress; the on-screen menu will not be recorded.

●

If the end of tape is reached during timer recording, the
cassette is automatically ejected.

●

When timer-recording cable or satellite channels through an
external tuner, be sure to keep the cable box or satellite
receiver's power ON.

EXAMPLE

If you program the VCR to timer
record a show on December 24
on channel 40 from 12:00 noon
to 1:00 PM in SP mode, the
screen will look like this:

PROGRAM 1

DATE

12/24 WED

START

12:00 PM

STOP

1:00 PM

CHANNEL

40 SP

PRESS NUMBER KEY (O–9)

OR (

5,∞), THEN (OK)

PRESS (MENU) TO END

q

2

3

6

5

/

8

3

7

8

1

¡

1

2

3

4

5

6

7

8

0

9

MENU

OK

CH

TIMER

MENU

CH

OK

SEARCH

TIMER indicator

Advertising