JVC CA-MXJ150R - Manual (Page 18)

– 13 –
English
Switching to a Traffic Announcement
Temporarily
By receiving EON data sent by FM RDS stations, the EON
function allows the unit to switch temporarily to a broadcast
of a traffic announcement from a different station.
• The EON function only works when you are listening to a
preset FM RDS stations providing EON data.
• The EON indicator lights while receiving a station with
EON data.
To activate the EON function
REMEMBER you must preset FM RDS stations to use the
EON function. If not yet done, see page 11.
1
Press and hold PTY/EON .
Each time you press and hold PTY/EON, “TA
ON” and “TA OFF” alternately appear
on the display.
TA ON: Switches to a traffic announcement, if any.
TA OFF: This function is canceled.
How the EON function actually works:
CASE 1
If there is no station broadcasting a traffic
announcement
The unit continues tuning in the current station.
«
When a station starts broadcasting a traffic announcement,
the unit automatically switches to the station. The TA
indicator starts flashing.
«
When the program is over, the unit goes back to the
previously tuned station, but the EON function still
remains activated.
CASE 2
If there is a station broadcasting a traffic
announcement
The unit tunes in the program. The TA indicator starts
flashing.
«
When the program is over, the unit goes back to the
previously tuned station, but the EON function still
remains activated.
CASE 3
If the FM station you are listening to is broadcasting a
traffic announcement
The unit continues to receive the station but the TA
indicator starts flashing.
«
When the program is over, the TA indicator goes off, but
the EON function still remains activated.
More about the EON function
• EON data sent from some stations may not be compatible with
this unit. In this case, the EON function may not work correctly.
• While listening to a program tuned in by the EON function, the
station does not change even if another network station starts
broadcasting a program of the same EON data.
• The EON function is canceled when you change the source to CD,
TAPE, or AUX, while it is temporarily canceled when you change
the source to AM.
PTY
/EON
TA OFF TA ON
EN01-13.CA-MXJ150R[E]/f 00.5.22, 2:26 PM 13