Remote programming, Dvd codes – JVC AV 32F704 User Manual
Page 21
����
����
�����
�������
���
�������
�����
����������
�����
�������
���������
�������
�������
���
���
��������
��������
���
���
���
���
���
���
���
��������
���
����������
�����
�����
���
�����
�������
�����
��������
����
��������
�������
����
������
������
���
��������
���
���
���
���
����������������
���
���
���
���
���
��������
����������
�����
������
���
The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward,
rewind, previous/next chapter, tray open/close, and still/pause operation.
1) Find the DVD player brand from the list of codes shown below.
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.
3) Press and hold down the D
ISPLAY
button, then enter the first code number listed with the 10
key pad.
4) Release the D
ISPLAY
button, and confirm the operation of the DVD player.
• If your DVD player does not respond to the first code, try the others listed. If it does not
respond to any of the codes, try the search codes function on page 22.
• After you program your remote, some DVD buttons may not work properly. If so, use the DVD
player’s remote.
Remote Programming
DVD Codes
21
GJ English
4/24/03, 12:50 PM
21