Radio operation (continued), Automatically store / preset scan, Scan – Jensen SIRIUS MSR4115 User Manual

Page 10: Weather band operation, Operación de la radio (continuado), Exploración (escaneo), Mémorisation automatique / balayage programmé, Balayage, Opération bande du temps, Msr4115

Advertising
background image

MSR4115

10

Press and hold

P

A

resione y mantenga presionado

ppuyez et maintenez

Preset Number Appears

E

L

l número preseleccionado aparecerá

e numéro préréglé apparaîtra

1

2

MSR4115

50W X 4

PULL OPEN

CD WEATHER RECEIVER

POWER

CHANNEL

S-MOD

SHIFT/SCAN

VOL

VOL

SEL

MENU

CATEGORY

DIM

MODE

EJECT

DISP

LOUD

B

A

N

D

AS/PS

E

N

T

E

R

EL

APSE

MUTE

1

2

3

4

5

6

7

8

9

0

MEM

PGM

RPT

SHF

SCN

Radio Operation (continued)

16. Automatically Store / Preset Scan

Automatically Store

To automatically select ten strong stations and store them in the current band, select a band (if
needed) and press AS/PS (16) for more than three seconds. The 10 strongest stations are
stored as presets, replacing any preset stations already stored in that band.

Preset Scan

To scan stations stored in the current band, select a band (if needed) and press AS/PS for less
than three seconds. The unit will pause for ten seconds at each preset station. Press AS/PS
again to stop scanning when the desired station is reached.

17. Scan

Press SHIFT/SCAN (17) to scan all stations in the current band. The unit will play each station
for five seconds. Press SHIFT/SCAN again to stop scanning and listen to the current station.

18. Weather Band Operation

After accessing the weather band, momentarily press CHANNEL << or CHANNEL >> to move
to the next or previous of the seven available channels. Channels can also be accessed by
momentarily pressing the corresponding preset button (1-7).

Operación de la radio (continuado)

16. Almacenamiento Automático / Preselección Mediante Escáner

Almacenamiento Automático de Emisoras
Seleccione diez emisoras de señal fuerte y almacénelas en la banda actual. Seleccione una banda si
fuera necesario. Mantenga pulsado el botón la AS/PS (16) en forma continua por más de tres
segundos. Las emisoras reemplazarán a aquellas que se habían almacenado previamente.
Preselección Mediante Escáner
Busque con el escáner las emisoras almacenadas en la banda actual. Seleccione una banda si fuera
necesario. Pulse el botón AS/PS por menos de tres segundos. La radio hará una pausa de 5
segundos en cada emisora que encuentre. Pulse AS/PS nuevamente para que el escáner se detenga
cuando haya encontrado la emisora deseada.

17. Exploración (escaneo)

Presione SHIFT/SCAN (17) para explorar todas las estaciones en la banda actual. La unidad
pasará cada estación por cinco segundos. Presione SHIFT/SCAN nuevamente para dejar de
explorar las estaciones y escuchar la actual.

18. Operación de Banda del Tiempo

Luego de acceder a la banda del tiempo, momentáneamente presione CHANNEL << o
CHANNEL >> para mover al próximo o previo de los siete canales disponibles. Los canales
también se pueden acceder momentáneamente presionando el botón programado
correspondiente (1-7).

Fonctionnement de la radio (continué)

16. Mémorisation automatique / Balayage programmé

Mémorisation automatique de stations

Sélectionnez dix stations pour les mémoriser dans la bande affichée. Sélectionnez une bande
(au besoin). Appuyez sur AS/PS (16) et maintenez-le enfoncé pendant plus de trois secondes.
Les nouvelles stations remplacent les stations mémorisées pour cette bande.

Balayage programmé

Balayage des stations mémorisées pour la bande affichée. Sélectionnez une bande (au besoin).
Appuyez sur le bouton AS/PS pendant moins de trois secondes. La radio fait une pause de cinq
secondes à chaque station. Appuyez de nouveau sur le bouton AS/PS pour mettre fin au
balayage lorsque vous avez atteint la station désirée.

17. Balayage

Appuyez sur SHIFT/SCAN (17) pour balayer toutes les stations sur la bande courante. L'appareil va
jouer chaque station pendant cinq secondes. Appuyez de nouveau sur SHIFT/SCAN pour arrêter le
balayage et écouter la station courante.

18. Opération bande du temps

Après avoir accédé à la bande du temps, appuyez momentanément sur CHANNEL << ou CHANNEL
>>
pour vous déplacer à la chaîne prochaine ou précédente parmi les sept chaînes disponibles. Des
chaînes peuvent être accédées en appuyant momentanément sur les boutons de préréglage
correspondants (1 à 7).

Preset Stations

Preselección de Emisoras

Stations programmées

Advertising