JVC AV 27230 - Manual (Page 29)

29
V-Chip
Set Lock Code
Channel Guard and V-Chip settings are protected by a four-digit Lock Code. Your TV comes pre-set
with a Lock Code of "0000". You may change the code to any four-digit number you wish. To
change the Lock Code, follow the steps below.
Press the M ENU button
➐❷ To SET LOCK CODE
➛❿
To operate
The lock icon appears
Press Z ERO to access the Lock Code
The first digit will be highlighted
➛❿
To select the number
➐❷ To move to the next digit
Continue to follow these directions for all four numbers
➐❷ To FINISH
➛❿
To save settings and exit
Your Lock Code is now set.
LOCK CODE 0 0 0 0
FINISH
0
• After a power interruption you must reset the Lock Code.
• Write your Lock Code number down and keep it hidden from potential viewers.
• If you forget the Lock Code, a new code may be set using the steps listed above.
NOTES:
FD mini-IB 1/16/01 3:33 PM Page 29