Jabra AVAYA X-ONE GN1215 - Manual (Page 2)

featureS & benefitS
Jabra gn1215
Features BeneFits
simple 8-position slide adjustment no need for a user manual; simply slide until receiving end can hear you clearly
standard connector (rJ9) connects to all avaya x-one telephones using a standard modular plug
standard gn netcom Quick disconnect plug to
headset straight 80 cm / 31.5 inch cord guaranteed to work with our most popular headsets equipped with Quick disconnect
Headset type MiCrOpHOne settinG
Jabra gn2000 nb series 5
Jabra gn2000 iP series 3
Jabra gn2100 nc series 6
Jabra gn2100 st series 5
Jabra gn1900 switch setting 8
setting may vary +/- 1
The new Avaya X-One phones, at present the 96xx, 16xx
and 17xx series is being introduced across all Avaya phone
platforms. The phones have headset ports with unique
electrical characteristics that are not compatible with
some existing GN Netcom direct connect corded headsets.
This compatibility issue is resolved when using the
Jabra GN1215 cord. GN Netcom wireless headsets such as
Jabra GN9125 and Jabra GN9300e Series, and amplifiers such as
Jabra GN8000 and Jabra GN8210, are fully compatible with these phones on compatibility “A” setting. The Jabra GN1215
cord compensates for the differences in electrical
characteristics of the various microphones on our family of
corded headsets. The Jabra GN1215 solves this and works with
all our headsets. It has a setting for each different headset.
The cord will only work on aforementioned phones and is not
a “universal” solution like the Jabra GN1200. The Jabra GN1215
cord has been tested with the following GN Netcom corded
headsets with the switch settings shown below.