GE 94904 GE Universal Remote - Manual (Page 7)

Programming for Cable /DVD
Use the CBL/DVD button to assign your cable box or
DVD player. This button could also be assigned to a
CDplayer, another TV, VCR or DVD player.
1. Manually turn on
the Cable Box, DVD
Player, or other device.
2. Press and hold the
SETUP button until
the INDICATOR
LIGHT lights, then
release the SETUP
button.
3. Press and release
the CAB/DVD button
(the INDICATOR LIGHT
will blink then
remain lit).
4. Find the three digit
code for your
device in the
code list in the
back of this book
and enter it using
the Number Buttons.
After your code is
entered, the INDICATOR
LIGHT will turn off.
5. Aim the remote at
your device and
press the POWER
button. Your device
should turn off.
Note: If your device
does not respond, try all
the codes for your brand. If the codes do not work,
or your brand is not listed, try the Code Search
method on page 8.
6. With your device
on, press CHANNEL UP.
If the device responds,
no further programming
is required.
7. Enter your code here
for easy reference.
BLINK
OFF
CAB/DVD/DEVICE CODE
6
94904 Revised Size 2/25/02 3:57 PM Page 7