JVC AV 36D302 - Manual (Page 19)

Remote Programming
19
VCR codes
The remote control is programmed with VCR codes for power on, power off, play, stop, fast-forward,
rewind, pause, record, channel up, and channel down operation.
1) Find the VCR brand from the list of codes shown below.
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.
3) Press and hold down the D
ISPLAY button.
4) With the D ISPLAY button held down, enter the first code number listed with the 10 key pad.
5) Release the D ISPLAY button.
6) Confirm the operation of the VCR.
• If your VCR does not respond to the first code, try the others listed. If it does not respond to any
code, try the Search Codes Function, on page 50.
• Some manufacturer’s VCR’s may not respond to the T V / V C R button, even if other buttons work properly.
• To record, hold down the R
EC button on the remote and press P LAY .
D502/302/202 mini-IB 4/5/01 9:40 AM Page 19