Janome DC 3050 - Manual (Page 20)

18
Altering the stitch length
The stitch length can be altered between 0.0 and 5.0.
Press the mode key to activate stitch length
adjustment (the bottom green light lights up).
The preset value 2.0 will be indicated.
Press the plus (+) key to increase the stitch length.
Press the minus (–) key to decrease the stitch length.
w Stitch length
NOTE:
The stitch length and width can be altered while
stitching.
Altering the stitch width
The stitch width can be altered between 0.0 and 7.0.
Press the mode key to activate stitch length
adjustment (the middle green light lights up).
The preset value "5.0" will be indicated.
Press the plus (+) key to increase the stitch width.
Press the minus (–) key to decrease the stitch width.
q Stitch width
q
q
w
Zigzag Stitch
The zigzag stitch is used for various sewing needs
including overcasting. It can be used on most woven
fabrics.
A dense zigzag stitch can also be used for appliqué.
w
Machine Settings
q Pattern: #10
w Presser foot: Zigzag foot A