JVC LCT1638-001B-A - Manual (Page 44)

44
If your television is connected to an external speaker source, audio out gives you the option of
controlling the volume level with your TV’s remote control.
Press the M ENU button
π† To AUDIO OUT
è To VARI or FIX
Press the M ENU button when finished
VARI: Lets you adjust the volume of the external speakers
using the V
OLUME +/– buttons on your TV’s remote control.
FIX: The volume of the external speakers is adjusted
using the audio device’s remote control.
Audio Out
Initial Setup
When you are using a surround system, you can substitute the speaker of this television for
the center speaker of your surround system. Set CENTER CH INPUT to on when you use the
speaker as the center speaker of your surround system.
Press the M ENU button
π† To CENTER CH INPUT
√® To adjust CENTER CH INPUT to “ON” or “OFF”
Press the M ENU button when finished
Note:
The normal speaker output is 20W 16Ω. The maximum is
40W. If you exceed the maximum, your speaker may break.
Center CH Input
INITIAL SETUP
SELECT OPERATE EXIT MENU
NEXT PAGE
PREVIOUS
(1/4)
DIGITAL-IN
DIGITAL-IN AUDIO
CENTER CH INPUT
AUDIO OUT
TV SPEAKER
SIZE1
DIGITAL
ON
VARI
ON
INITIAL SETUP
SELECT OPERATE EXIT MENU
NEXT PAGE
PREVIOUS
(1/4)
DIGITAL-IN
DIGITAL-IN AUDIO
CENTER CH INPUT
AUDIO OUT
TV SPEAKER
SIZE1
DIGITAL
ON
VARI
ON
If your TV is connected to a stereo system, you can turn off the TV speakers and listen to the
audio through your stereo.
Press the M ENU button
π† To TV SPEAKER
√® To turn the TV’s speakers ON or OFF
Press the M ENU button when finished
Notes:
• Before you turn the TV speaker setting from OFF
to ON, make sure that the TV volume level is low! If the TV volume is set too high, the
sound level will be extremely loud.
• After a power interruption, the TV speaker settings will return to “ON”.
TV Speaker
INITIAL SETUP
SELECT OPERATE EXIT MENU
NEXT PAGE
PREVIOUS
(1/4)
DIGITAL-IN
DIGITAL-IN AUDIO
CENTER CH INPUT
AUDIO OUT
TV SPEAKER
SIZE1
DIGITAL
ON
VARI
ON
AV-32S575\585 "B" 44 6/17/04, 10:34:11 AM